Subaru WRX Fuel Injector Replacement

Click On Images For Large View

Conquering The Green Brackets Of Death

Driver's Side

Step 1- Remove the driver's side green bracket by removing the 4 bolts in the locations shown. It helps to remove the battery and washer fluid reservoir.

Step 2- Slightly bend the A/C line on the driver's side being cautious not to kink it and slide the green bracket out .

Step 3- Remove 1 of 2 bolts securing the fuel line at the top of the motor on the driver's side.

Step 4- Remove the 2nd bolt securing the fuel line at the top of the motor on the driver's side.

Step 5- Remove the bolt at the front of the motor securing the fuel line on the driver's side.

Step 6- Remove the 2 bolts securing the fuel rail to the motor on the driver's side.

Step 7- Gently pull up on the fuel rail to release the injectors. disconnect wiring from injectors and pull injectors out of the fuel rail.

Passenger Side

Step 8- Remove the 2 bolts and 1 nut securing the coolant reservoir tank on the passenger side and move it up and out of the way for more clearance.

Step 9- Remove the 2 small bolts securing the hoses to the green bracket on the passenger side. It helps to remove the air intake.

Step 10- Remove the passenger side green bracket by removing the 5 bolts in the locations shown. Gently hold up the cables and hoses while sliding the bracket out. Patience is the Key.

Step 11- Remove the bolt at the front of the motor securing the fuel line.

Step 12- Remove the 2 bolts securing the fuel rail to the motor.

Step 13- Gently pull up on the fuel rail to release the injectors. disconnect wiring from injectors and pull injectors out of the fuel rail.

Installation is reverse of removal. Click here for instructions on modifying the stock injectors.